#Ocr scanner handheld parts manual code

Codabar/NW7, Interleaved 2 of 5, Code 2 of 5. Parameters Working temperature: 0 C-50 C Storage temperature: -30 C -60 C Working humidity: 5%RH-95%RH (non-condensing) Drop height: 1.5 meters Supported code

height) Weight 72 g (excluding direct charger) Environmental.

Interface Pogo pin contact Memory capacity 64MB External dimension 62.9mm’33mme18.7mm (length x width LED tri-color light, vibration motor USB 5V ©500mA (max) Communication

#Ocr scanner handheld parts manual Bluetooth

Instructions for Status Light Status light Description Red indicator light is always on Scanning code or charging Red indicator light flashes once Setup failure Green indicator light flashes once Scan code successfully Green indicator light is always on Battery fully charged Blue indicator light keeps flashing Bluetooth enters pairing mode Blue indicator light is always on the Bluetooth is connected successfully Instructions for Buzz and Vibration Buzzer, vibration status Description Start-up sound + no vibration Device successful startup One long buzz + vibration Successful shutdown One short buzz + vibration Successful decoding Two short buzz + no vibration The battery is set successfully, the Bluetooth isĬonnected successfully, and the Bluetooth isĭisconnected One long buzz + no vibration Setup failure Performance parameters Image sensor 1280 (horizontal) x 800 (vertical) CMOS. Scan the QR code with SR5600, and the buzzer buzz twice, which indicates successful setting. After installation, set according to actual requirements and the QR code will be generated.

#Ocr scanner handheld parts manual apk

To change the code system and other settings, download the setting code APK or WeChat setting code applet from the official account of “UROVO”.

After successful connection, the blue light is always on,the buzzer buzz twice, and the device starts working.

Connect by scanning the setting code (as described in Product Instructions IV).

Connect via SR5600 NFC touch (press the NFC switch of the main device, contact the main device with the SR5600 NFC, and follow the steps prompted by the main device to successfully set up).

Search for the corresponding Bluetooth name SR5600-XXXX (representing the last four digits of the Bluetooth Mac address) from the Bluetooth list of the main device.

Connect the SR5600 with the main device Bluetooth, there are three connection methods as follows:.

After booting, SR5600 Bluetooth scanner (hereinafter referred to as SR5600) automatically enters the Bluetooth Standby Pairing mode, and the blue light keeps flashing

Press and hold the power button and then release it.